Pakistan Steel Quran Ayat Banner
Commercial Operations

Dealership Network & Sales Policy

Authorized dealer categories, refundable security deposits, contract sales terms, and product allocation policies.

Dealership Categories & Security Deposits

The sale of Pakistan Steel products is channelized through our dealership network. To keep sales procedures transparent and free from bias or malpractice, sales are restricted to verified and genuine customers evaluated on credibility, past performance, and tax records.

Dealerships are offered across the following categories against refundable security deposits:

Category Eligible Products Security Amount
Category ‘A’ Coke, Pig Iron & By-products Rs. 150,000
Category ‘B’ Long Products (Billets / Blooms / Slabs / Cobble Plate) Rs. 250,000
Category ‘C’ Flat Products (HR / CR / GP / Cobble Plate) Rs. 400,000

A prescribed proforma is available for obtaining dealership of Pakistan Steel products, detailing required supporting documents and terms and conditions.

Sales Policy Framework

The Sales Policy for Pakistan Steel products is formulated based on operational experience, customer demand, and domestic as well as international iron and steel market conditions. It is structured around five core objectives:

  • Streamline sales procedures.
  • Improve overall sales performance.
  • Operate purely on commercial lines.
  • Optimize productivity and profitability.
  • Address customer-related activities promptly and effectively.
Based on amendments to Sales Policy-99 approved by the Price Fixation / Review Committee, the following selling arrangements apply (effective September 10, 2004).

(a) Contract Sale

Pakistan Steel may enter into contracts with customers in accordance with Standard Terms & Conditions of Sales (Annexures I and II).

(i) Security Deposit

Prior to signing a contract, customers deposit a security amount covering the entire contract quantity via Pay Order or Bank Draft, refundable or adjustable against the next contract upon completion:

  • HR / CR / GP / Billet: Rs. 50 PMT for quantities 5,000 MT and above; Rs. 100 PMT for quantities below 5,000 MT.
  • Coke / Pig Iron / By-products: Rs. 50 PMT; Slag: 5% of contract value.

(ii) Quantities & Tolerances

Minimum order quantities against a contract:

Product Minimum Quantity*
HR Products 300 MTN
CR & Galvanised Products 100 MTN
Billets & Blooms 100 MTN
By-products 100 MTN

*Quantities are subject to revision without notice or reference. Supply quantity variation is ±10% of contractual quantities at the seller’s option.

(iii) Prices

Contractual prices are tentative. Customers pay prices prevalent at the time of taking delivery, along with any new government taxes or duties levied prior to delivery.

(iv) Delivery Periods (Tentative)

Tentative delivery periods for commercial and standard grades/sizes:

HR Coils 120 working days
CR Coils 120 working days
HR Sheets / Strips 150 working days
CR Sheets 150 working days
HR Pickled & Oiled 150 working days
GP Coils 150 working days
Billets 60 working days

(v) Joint Contract Signatories

GM / Incharge Sales
OR
Incharge Sales Office(s)
OR
Incharge / Rep. of Customer Service Teams
AND
DGM (Finance-Sales ZSO)
OR
Manager (Finance-Sales ZSO)
OR
Authorised Rep. (Fin-Sale ZSO)

(vi) Notice of Readiness (NOR)

Material is offered in parts or full upon receipt from production units. Buyers must obtain the Delivery Order within seven (07) working days from NOR issuance and lift material within seven (07) working days of D.O. issuance, or face full or pro-rata security forfeiture.

(vii) Size-Mix (Standard Contract)

1. HR Products Size Ratio: 2.0mm (20%), OR 1.6/1.8mm (5%), 1.9/2.0mm (10%), and balance ratio (15%).
2. CR & GP Products Size Ratio: Over 0.6 & up to 0.7mm (40%), OR Over 0.5 & up to 0.6mm (10%), Over 0.6 & up to 0.7mm (25%), and 35% mix; OR Up to 0.5mm (5%), Over 0.5 & up to 0.6mm (5%), Over 0.5 & up to 0.6mm (20%), and 30% mix.
3. Quantity tolerances are ±10% at the seller’s option.
4. Size-mix ratios are subject to revision without notice.
5. Consumers may contract specific sizes outside standard ratios subject to material availability.

(viii) Acceptance of Orders in Thickness & Widths (mm)

Product Line Thickness & Width Specifications (mm)
HR Products 1.6, 1.8, 2.0, 2.35, 2.65, 2.87, 3.0, 3.25, 3.38, 3.65, 3.9 × 1000/1220
4.0, 4.25, 4.5, 4.78, 5.0, 5.56, 6.0, 6.35, 7.0, 7.92, 8.0, 9.0, 9.5, 10.0, 10.5, 11.0, 12.0 × 1000/1220/1510
(HR Sheets: traders up to 50% max; consumers as required)
CR / GP Products 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 1.1 × 915/950/1220
4.0, 4.25, 4.5, 4.78, 5.0, 5.56, 6.0, 6.35, 7.0, 7.92, 8.0, 9.0 × 915/950/1220
Galvanized Products 0.5, 0.55, 0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 1.0, 1.2, 1.5 × 915/950/1220

Additional Sales & Commercial Terms

(b) Running Contracts (Long Term)

Long-term contracts may be executed for a minimum of six (06) months, or twelve (12) calendar months for minimum quantities of 20,000 MT HR products and 20,000 MT M.S. Billets/Blooms/Slabs. Security deposit is Rs. 50 PMT via Pay Order/Bank Draft, with tentative prices subject to prevailing rates and applicable taxes/duties at delivery (Annexure I).

(c) Open Sale

  1. Off-plan, off-grade, and uncommitted stocks are sold to registered dealers via contract or as Uncommitted Stock (UCS) on cash/credit per policy.
  2. Government departments may purchase directly on cash outside the dealership network as a one-time deal with no commission.
  3. Stuck-up or incentive packets are sold under approved procedures; stuck-up portions may be sold on credit per policy.

(d) Tender Sale

Slow-moving, stuck-up, or old stocks may be offered via tenders or auctions against reserve prices set by the Price Fixation Committee.

(e) Sale to Consumer Dealers on Firm Prices

Upon written request from consumers/manufacturers, projected prices may be held firm for a specified period subject to order volume and contract duration, contingent upon:

  1. Security deposit of 0.5% of total product value against tender/repeat order/contract/export L/C with attested supporting documents (refunded to unsuccessful bidders).
  2. Security deposit of 5% of total contract value at contract signing per standard terms.
  3. Refund of security upon submission of completion certificate from tendering authority or Bill of Lading for exports.
  4. Official bank endorsement of export L/C to Pakistan Steel where applicable.

(f) Commissions & Discounts

No commission is paid to consumer or trader dealers. Consumers receive priority over traders in material allocation.

(g) Trader Dealer Rebate

A 1.5% ad valorem rebate is granted to trader dealers on sales, excluding tender sales.

(h) Prices & Mode of Payment

  1. Prices are Ex-Works, Pakistan Steel, Bin Qasim, excluding sales tax, income tax, duties, local taxes, and transport.
  2. Payments are accepted via Bank Draft, Pay Order, or Irrevocable Letter of Credit (L/C negotiation charges borne by buyer at actuals).
  3. Credit facility with mark-up at 0.75% per 30 days is available up to a maximum of 180 days.
  4. Credit facilities require prescribed documentation against Irrevocable L/C or Bank Guarantee from a bank approved by Pakistan Steel.
  5. Upon buyer request and bank undertaking to pay against D.O.(s) five (05) clear working days before due date, L/C documents may not be negotiated unless payment defaults, in which case L/C documents are negotiated.
  6. Applicable sales tax, income tax, and duties are recovered at D.O. issuance via Bank Draft/Pay Order or L/C with mark-up at 0.75% per 30 days up to 180 days.

(i) Premium Price Quick Supplies

  1. Eligibility: Open to genuine consumers of Pakistan Steel products.
  2. Facilities: Priority in production/allocation; delivery within 5 working days from request against a valid running contract where ex-stock material is available.
  3. Conditions: 10% extra charge above effective listed prices at delivery. Material obtained under this scheme may not be resold in the open market; default may result in security forfeiture and cancellation of consumer dealership.

(j) Quality Complaints

  1. Submitted on prescribed proforma to Marketing. Outside ZSO (Karachi), complaints are handled by respective ZSOs and escalated to Incharge (QAD) via GM (Marketing) with inspection reports and samples if unresolved; ZSO (Karachi) complaints go directly to Incharge (QAD). Disputed material must remain available for inspection.
  2. Incharge (QAD) forwards QCD findings and recommendations to Director (Commercial) through Director (TS); GM (Marketing) notifies complainants of outcomes.
  3. Engineers from QCD and production units conduct quarterly visits to consumer facilities.

(k) Weight-Variation Complaints

Weight-variation complaints are forwarded to GM/Incharge (Sales) by Zonal Sales Incharges. Recommendations are prepared based on weighment records from production units, QCD, PSPS, and weigh-bridges.

(l) Standard Terms & Conditions of Sales

Standard contract format and terms & conditions of sale are provided in Annexure II.

(m) Dealership Status

No customer may hold “Consumer” and “Trader” dealerships simultaneously.